Deep groove ball bearings
Our deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality. Our portfolio includes standard, thin section, narrow, wide and miniature and extra-small deep groove ball bearings that span 3 mm to 400 mm bore sizes.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease.
- 280 mm x 380 mm x 46 mm skf 61956 MA Deep groove ball bearings
- 0.5625 in
- 3440 lbf
- 100 mm x 150 mm x 24 mm skf 6020-2Z Deep groove ball bearings
- Shield & Seal
- 80600 N
- 25 mm x 62 mm x 17 mm skf 6305-ZNR Deep groove ball bearings
- Non-Expansion
- Class 10
- 150 mm x 320 mm x 65 mm skf 6330 M Deep groove ball bearings
- Single Row
- 166 mm
- 15 mm x 24 mm x 5 mm skf 61802-2Z Deep groove ball bearings
- Tapered Bore
- 940 rpm
- 6 mm x 19 mm x 6 mm skf 626-2RSH Deep groove ball bearings
- 110.000 mm
- 50.00 mm
- 10 mm x 30 mm x 9 mm skf 6200-2Z Deep groove ball bearings
- 150.000 mm
- 1.00 mm
- 1,191 mm x 3,967 mm x 5,156 mm skf D/W R0 R-2Z Deep groove ball bearings
- Steel
- Concentric Clamp Col
- 105 mm x 160 mm x 26 mm skf 6021-RS1 Deep groove ball bearings
- 0.6 mm
- 21,400 N
- 6 mm x 19 mm x 6 mm skf 626-2RSL Deep groove ball bearings
- Yes
- Triple Lip
- 60 mm x 95 mm x 18 mm skf 6012-RS1 Deep groove ball bearings
- Standard
- Set Screw
- 4,762 mm x 15,875 mm x 4,978 mm skf D/W R3A-2RS1 Deep groove ball bearings
- 140.0000 mm
- Two Shields & Snap-R