USK BEARING COMPANY

Bearing units,Insert bearings

Mounted bearings, sometimes called bearing units or bearing blocks, have a bearing installed in a housing to ease installation and provide additional support for the bearing. They are face or surface mounted in applications where the shaft is perpendicular to the unit. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing.

More information. In addition to the bearings presented in this section, SKF supplies insert bearings for special application requirements. This assortment includes: Bearings and bearing units for high temperature applications; Bearings with Solid Oil; Bearings with a customized design or dimensions (contact SKF)

NTN df0766lluacs32 Bearing: A : 32 mm; J : 50.8 mm

20 mm x 47 mm x 25 mm SNR US.204.G2 Bearing units,Insert bearings: L1 : 65 mm; J1 : 51 mm

19.05 mm x 47 mm x 25 mm SNR US204-12G2T04 Bearing units,Insert bearings: Fatigue limit load, Cu : 0.38 kN; d : 30 mm

19.05 mm x 47 mm x 25 mm SNR US204-12G2 Bearing units,Insert bearings: Characteristic inner ring frequency, BPFI : 9.83 Hz; ra max : 1 mm

19.05 mm x 47 mm x 25 mm SNR US204-12G2T20 Bearing units,Insert bearings: B : 24.000 mm; G2 - Heat Generation Factor (Rib-Roller End) : 40.9

17 mm x 40 mm x 22 mm SNR US203G2T20 Bearing units,Insert bearings: Bearing - Housing - Seal : HSM155BRHHTPS; Bolt Size : 4 x M30

17 mm x 40 mm x 22 mm SNR US.203.G2.T04 Bearing units,Insert bearings: Fatigue limit load, Cu : 1.15 kN; ra max : 1 mm

17 mm x 40 mm x 22 mm SNR US.203.G2 Bearing units,Insert bearings: H2 : 125 mm; s1 : 27.8 mm

17.46 mm x 40 mm x 22 mm SNR US203-11G2T20 Bearing units,Insert bearings: J : 50 mm; d : 22.22 mm

17.46 mm x 40 mm x 22 mm SNR US203-11G2 Bearing units,Insert bearings: da - Inner Ring Backing Diameter : 90.600 mm; Da - Outer Ring Backing Diameter : 129.900 mm

17.46 mm x 40 mm x 22 mm SNR US203-11G2T04 Bearing units,Insert bearings: Oil Lubrication - M/N Seal : 1200 rpm; Dimension J (Bolt Size) : 1 in

15 mm x 40 mm x 22 mm SNR US202G2T20 Bearing units,Insert bearings: G : M6x1; Recommended tightening torque for set screw : 11.5 Nm