| No. | Brand | E | Z | X | J | e | W | V | a |
| 73077L | Franke | - | - | - | - | - | - | - | - |
| 36 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 77264B | Franke | - | - | - | - | - | - | - | - |
| 32 0841 01 | Rollix | - | - | - | 112 mm | 13 mm | - | - | - |
| 28 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 2 2022 | Rollix | - | - | - | - | - | - | - | - |
| 38 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 68680A | Franke | - | - | - | - | - | - | - | - |
| 39 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 68478A | Franke | - | - | - | - | - | 30 mm | - | - |
| 6 1595 04 | Rollix | - | - | - | - | - | - | - | - |
| 21 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 34 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 24 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 68733A | Franke | - | - | - | - | - | - | - | - |
| 66394L | Franke | - | - | - | - | - | - | - | - |
| 7 077 | Rollix | - | - | - | - | - | - | - | - |
| 73130L | Franke | - | - | - | - | - | - | - | - |
| 68950A | Franke | - | - | - | - | - | - | - | 21 mm |
| 68966A | Franke | - | - | - | - | - | - | - | - |
| 68510A | Franke | - | - | - | - | - | - | - | 4,9 mm |
| 33 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 39 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 77206A Franke Slewing Ring Bearings | (Grease) Lubrication Speed:8500 r/min; C:17,462 mm; D:49,225 mm; d:19.05 mm; Bearing number:09067/09196; Bore Diameter (mm):19.05; Weight:0,198 Kg; Basic dynamic load rating (C):38,5 kN; B:19,05 mm; Size (mm):19.05x49.225x21.209; Outer Diameter (mm):49,225; T:21,209 mm; Width (mm):21,209; Basic static load rating (C0):39 kN; |
| 7 077 Rollix Slewing Ring Bearings | d:3 mm; (Grease) Lubrication Speed:60 000 r/min; ra max.:0,08 mm; B:2,5 mm; da min.:3,6 mm; Width (mm):2,5; D:6 mm; Bore Diameter (mm):3; r min.:0,08 mm; Basic static load rating (C0):0,094 kN; Bearing number:673SSA; da max:4,1 mm; C:2,5 mm; Outer Diameter (mm):6; Basic dynamic load rating (C):0,242 kN; Weight:0,26 Kg; Da max.:5,4 mm; Size (mm):3x6x2.5; |
| 7 1075 01 Rollix Slewing Ring Bearings | hidTable:ecat_NSCLDRS; Outer Diameter (mm):125; Oil rpm:1100; ra max.:1 mm; Bearing number:RS-4918E4; DE_:116; Bore Diameter (mm):90; da_min:96.5; GRS rpm:2200; mass:1.35; ra:1; C0:268; hidYobi:RS-4918E4; r:1.1; D:125 mm; r min.:1,1 mm; KBRG:4220; Weight:1,35 Kg; doh:3; DA_:9; |
| 66142L Franke Slewing Ring Bearings | Size (mm):100x180x68; Outer Diameter (mm):180; C:68 mm; Bore Diameter (mm):100; D:180 mm; B:68 mm; Bearing number:7220HG1DUJ74; Angle (α):20 °; d:100 mm; Width (mm):68; |
| 75010A Franke Slewing Ring Bearings | Bore Diameter (mm):80; rb max.:1 mm; r3 min.:1 mm; r2 min.:2 mm; a:28 mm; Basic dynamic load rating (C):85,2 kN; r1 min.:2 mm; D:140 mm; Fatigue load limit (Pu):3,05; ra max.:2 mm; r4 min.:1 mm; Db max:134,4 mm; Basic static load rating (C0):75 kN; D1:124,3 mm; db min:91 mm; C:26 mm; (Grease) Lubrication Speed:12 000 r/min; Size (mm):80x140x26; B:26 mm; da min.:91 mm; |
| 1 0947 Rollix Slewing Ring Bearings | D:62 mm; Required attachment bolt size:M6; J:48 mm; d1:30 mm; Basic static load rating - C0:31 kN; r3,4 - min.:0.6 mm; H:6.8 mm; Basic dynamic load rating - C:19 kN; a:65 mm; Width (mm):25; H1:17 mm; d:17 mm; D1:38 mm; da - min.:23 mm; Bore Diameter (mm):17; Size (mm):17x62x25; r1,2 - min.:0.3 mm; Mass bearing:0.45 kg; Bearing number:BEAM 017062-2RS/PE; Preload:720 N; |
| 2 1715 Rollix Slewing Ring Bearings | C:755,65 mm; D:1035,05 mm; Sa:13 mm; Da:966 mm; r1 min.:3,3 mm; d:730,25 mm; Outer Diameter (mm):1035,05; Width (mm):755,65; Weight:2 210 Kg; Size (mm):730.25x1035.05x755.6; Bearing number:E-M283449D/M283410/M; da:774 mm; B:755,65 mm; r min.:6,4 mm; Basic dynamic load rating (C):18 100 kN; Bore Diameter (mm):730,25; |
| 68510A Franke Slewing Ring Bearings | r1 min.:2 mm; Weight:1,82 Kg; D1:145,24 mm; f:2,82 mm; Outer Diameter (mm):150; C:28 mm; D:150 mm; Width (mm):28; r2 min.:2 mm; Bore Diameter (mm):85; Size (mm):85x150x28; Bearing number:6217-NR; D2:159,7 mm; d:85 mm; Basic static load rating (C0):62 kN; B:28 mm; b:3,1 mm; a:4,9 mm; Basic dynamic load rating (C):84 kN; |
| 7 0885 01 Rollix Slewing Ring Bearings | Size (mm):12x18x12; Basic dynamic load rating (C):6000 kN; Outer Diameter (mm):18; D:18 mm; d:12 mm; Bore Diameter (mm):12; Width (mm):12; Bt:9,3 mm; C:12 mm; Basic static load rating (C0):6800 kN; Bearing number:BK1212; |
| 2 1225 Rollix Slewing Ring Bearings | Basic dynamic load rating C:28.6 kN; da max.:46.5 mm; D:80 mm; Da - max.:73.5 mm; B:21 mm; Bearing number:W 6307-2Z; D2:71.58 mm; Basic static load rating - C0:19 kN; Basic dynamic load rating - C:28.6 kN; Calculation factor - f0:13.2; r1,2 - min.:1.5 mm; Calculation factor kr:0.035; Bore Diameter (mm):80; Outer Diameter (mm):35; ra - max.:1.5 mm; r1,2 min.:1.5 mm; da min.:43 mm; d:35 mm; Basic static load rating C0:19 kN; |
| 73034L Franke Slewing Ring Bearings | Limiting speed:3200 r/min; K:4,5 mm; r1 min.:2 mm; D:210 mm; Calculation factor (e):0,28; ra max.:2 mm; d:130 mm; Calculation factor (Y1):2,4; r2 min.:2 mm; Basic static load rating (C0):780 kN; Basic dynamic load rating (C):560 kN; Bearing number:23126CCK/W33; Reference speed:2400 r/min; Size (mm):130x210x64; B:64 mm; Weight:8,8 Kg; b:8,3 mm; Width (mm):64; Calculation factor (Y0):2,5; d2:148 mm; |
| 22 0941 01 Rollix Slewing Ring Bearings | r:3,3 mm; Outer Diameter (mm):152,4; D:152,4 mm; d:74,612 mm; C:31,75 mm; B:41,275 mm; Bore Diameter (mm):74,612; R:3,5 mm; Size (mm):74.612x152.4x41.275; T:41,275 mm; Bearing number:658/652; Width (mm):41,275; |
| 75061A Franke Slewing Ring Bearings | OD Chamfer Length (Co):0.600; Bearing Length Tolerance (B tol.) - +0 / -0.30:+0 / 0.30; ID Chamfer Angle (B deg.):30; ID Chamfer Length (Ci):0.300; Bearing Type:straight; Outer Diameter (mm):17; Bearing Length, Nominal (B):10.000; Average Clearance (Cd):0.0490; Bearing Outside Diameter, Nominal(Do):17.000; Housing Bore Dia. (Dh):17 +0.018 / +0; Bearing Bore after Mounting (di):15.058 / 14.99; Wall Thickness (S3):1.005; |
| 77206B Franke Slewing Ring Bearings | Bore Diameter (mm):36; Bearing number:SAB32; d:36 mm; B:34 mm; Size (mm):36x72x34; Outer Diameter (mm):72; C:34 mm; Width (mm):34; D:72 mm; |
| 71049A Franke Slewing Ring Bearings | d:25 mm; Bore Diameter (mm):25; Size (mm):25x62x18.25; Bearing number:30305; D:62 mm; Outer Diameter (mm):62; Width (mm):18,25; |
| 25 0741 01 Rollix Slewing Ring Bearings | Size (mm):110x240x92.1; Basic dynamic load rating (C):678 kN; Outer Diameter (mm):240; Bearing number:NUP3322; Basic static load rating (C0):918 kN; d:110 mm; D:240 mm; Width (mm):92,1; Weight:22,21 Kg; Fw:143 mm; C:92,1 mm; Bore Diameter (mm):110; (Grease) Lubrication Speed:2200 r/min; B:92,1 mm; |
2 204 Rollix Slewing Ring Bearings Video
1302.07. (UCC 2-204) Formation in general. - Justia Law
(A) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
§ 2-204 Formation in general | Osage Nation Code
A. A contract for sale of goods may be made in any manner sufficient to show agreement, including offer and acceptance, conduct by both parties which ...
§ 28:2–204. Formation in general. | D.C. Law Library
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
2-204 Form 2. General Contract for Sale of Goods - Westlaw
Prac., UCC Forms § 2-204 Form 2 (3d ed.) Missouri Practice Series TM. |. November 2021 Update. Uniform Commercial Code Forms. William H. Henning.
Murder in the second degree, Md. Code, Crim. Law § 2-204
Section 2-204 - Murder in the second degree (a) A murder that is not in the first degree under § 2-201 of this subtitle is in the second degree.
2-204. Formation in General. | Uniform Commercial Code
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
Uniform Commercial Code 2-204 - Nebraska Legislature
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...