| No. | Brand | N | r | A | J | S | E | G | F |
| UK.310.G2 | SNR | - | - | 33.7 mm | 130 mm | 18.8 mm | - | R1/8" | - |
| US207-23G2T04 | SNR | 13mm | - | - | 105 mm | - | - | M6x1 | - |
| UK311G2H-31 | SNR | - | - | - | - | - | - | M6x1 | - |
| UK.309.G2 | SNR | - | - | - | - | - | - | M10x1 | - |
| UK.319.G2 | SNR | - | - | - | - | - | - | - | - |
| UK.324G2H | SNR | - | - | - | - | - | - | - | - |
| US206-18G2 | SNR | - | - | - | - | - | - | - | - |
| US.201.G2 | SNR | - | - | - | - | - | - | - | - |
| UK.320G2H | SNR | 19mm | - | - | - | 22 mm | - | M6x1 | - |
| US205-15G2T20 | SNR | - | - | - | - | - | - | - | - |
| UK.305.G2 | SNR | - | - | - | - | - | - | - | - |
| UK306G2H-16 | SNR | - | - | - | 330 mm | - | - | - | - |
| US205G2T20 | SNR | - | - | - | - | - | - | - | - |
| US209-27G2 | SNR | - | - | - | 95 mm | - | - | - | - |
| US211-35G2 | SNR | - | - | - | - | - | - | - | - |
| US207-23G2T20 | SNR | 16mm | - | - | 111 mm | - | - | M6x1 | - |
| UK.312G2H | SNR | - | - | - | - | - | - | - | - |
| US201-08G2T20 | SNR | - | - | - | - | - | - | - | - |
| US206-19G2T20 | SNR | - | - | - | - | - | - | - | - |
| ZUC207-23FG | SNR | - | - | 33 mm | 184 mm | - | - | - | - |
| 41.28 mm x 85 mm x 41.2 mm SNR US209-26G2 Bearing units,Insert bearings | G:M6x1; A3:2.5 mm; B1:59 mm; Weight:2.3 kg; T min.:-20 °C; B:33 mm; Designation of bearing:UK211G2H-30; H:125 mm; Designation of housing:C211-; Adapter sleeve reference:H2311-30; Size (mm):41.28 mm x 85 mm x 41.2 mm ; |
| 63.5 mm x 160 mm x 55 mm SNR UK315G2H-40 Bearing units,Insert bearings | R - Cone Backface To Clear Radius1:7.110 mm; Cg - Geometry Factor:0.146; Cage Type:Stamped Steel; K - Factor7:1.43; Cone Part Number:99600P; Cup Part Number:99098X; da - Cone Frontface Backing Diameter:169.93 mm; B:66.675 mm; D:250 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Size (mm):63.5 mm x 160 mm x 55 mm ; |
| 57.15 mm x 140 mm x 49 mm SNR UK313G2H-36 Bearing units,Insert bearings | L:274 mm; Recommended tightening torque for set screw:11.5 Nm; s1:34.1 mm; S:18.2 mm; d:30 mm; SW:4 mm; H2:41 mm; H:98 mm; A:21 mm; A5:18.2 mm; Size (mm):57.15 mm x 140 mm x 49 mm ; |
| SNR UK.305.G2 Bearing units,Insert bearings | C:35.1 kN; N1:19 mm; A1:16 mm; Weight:2.62 kg; L1:90 mm; C0:23.2 kN; H2:83 mm; L:149 mm; T min.:-20 °C; T max.:100 °C; |
| 19.05 mm x 47 mm x 31 mm SNR ZUC204-12FG Bearing units,Insert bearings | Dimension H:2.362 in; Bolt Size:2 x M12; Bearing - Housing - Seal UPC:013992089120; Bearing Type:Split Cylindrical Re; Pillow/Plummer Block Style:Split Cylindrical Ho; Ca - Axial Load Rating:719.38 lbf; Bearing Number:LSE108BR; Maximum Speed:5400 rpm; Bearing UPC:013992025401; Dimension M:2.4 in; Size (mm):19.05 mm x 47 mm x 31 mm ; |
| SNR UK.308.G2 Bearing units,Insert bearings | G:R1/8"; d:42.86 mm; C:31.85 kN; T max.:100 °C; H:54 mm; N1:29 mm; L1:54.5 mm; C0:20.8 kN; Weight:2.22 kg; B:49.2 mm; |
| SNR UK.324.G2 Bearing units,Insert bearings | Weight:0.44 kg; A1:10 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; N:11,5mm; J:63.5 mm; B1:28.6 mm; s1:23.05 mm; T max.:100 °C; A2:41.1 mm; |
| 41.28 mm x 85 mm x 41.2 mm SNR US209-26G2T20 Bearing units,Insert bearings | Bearing Number:22222; Pre Install Clearance Max:0.0055 in; C - Dynamic Load (Basic):125000 lb; Oil Lubrication - T Seal:1700 rpm; Shaft Size :4 in; Grease Lubrication - B/C/O Seal:600 rpm; Dimension E:7.60 in; C0 - Static Load:147000 lb; Dimension SV:4.13 in; e - Geometry Factor:0.26; Size (mm):41.28 mm x 85 mm x 41.2 mm ; |
| 61.91 mm x 110 mm x 53.7 mm SNR US212-39G2T04 Bearing units,Insert bearings | Y0:2.58; ra max:1 mm; Max operating temperature, Tmax:200 °C; e:0.26; Nlim:9,800 rpm; Characteristic cage frequency, FTF:0.42 Hz; D1:75.6 mm; Number of lubrication holes:3; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.85 Hz; Size (mm):61.91 mm x 110 mm x 53.7 mm ; |
| SNR UK.319.G2 Bearing units,Insert bearings | Shipping Weight:869 lb; Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x M30; Dimension H1:2.2 in; Dimension J:22.0 in; Shaft Size:5-11/16 in; Seal Type:Aluminium Triple Lab; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:10.0 in; Bearing Number:HSE511BX; |
US205-15G2 Mancais autoalinháveis : NTN-SNR, fabricante
US205-15G2 Mancais autoalinháveis en el catálogo de NTN-SNR, fabricante de Indústria para el sector de la Rolamentos insertos
US205-15G2 SNR – 23.813x52x27 Łożysko samonastawne
Łożysko samonastawne US205-15G2 - wymiary: 23.813x52x27, producent: SNR. Zapraszamy do sklepu internetowego. Cały asortyment - łożyska, sprzęgła,
US205-15G2 Gehäuselager : NTN-SNR, Industrie Hersteller
US205-15G2 Gehäuselager auf dem NTN-SNR Katalog Industrie Hersteller für den Marktbereich Lagereinsätze
US205-15G2 | Online Catalog | Bearings | Products | NOC
Deep groove ball bearings. Single row, Y-bearings. Complete. SNR US 205-15 G2, US-205-15-G2, US205-15G2, US20515G2
SNR Sphärischer Außenring, Befestigung durch Gewindestifte
SNR Sphärischer Außenring, Befestigung durch Gewindestifte, Einlippendichtung ... SNR Spannlager mit Stellschrauben sphärischer Außenring US20515G2
Rodamiento Inserto Snr Ref. Us205-15g2 - Rodavigo
SNR US20515G2. Rodamiento inserto con tornillo allen en pulgada snr. El rodamiento inserto con tornillo allen en pulgadas SNR es un rodamiento que puede
Łożysko samonastawne US 205-15G2 23,813x52x27 SNR
Jul 30, 2013 - Informacje o Łożysko samonastawne US 205-15G2 23813x52x27 SNR - 3363578720 w archiwum allegro. Data zakończenia 2013-07-30
23.81 mm x 52 mm x 27 mm SNR US205-15G2 Bearing units,Insert bearings Video