ina thrust washer dimensions tolerances
INA (Schaeffler) TWD4860 - Thrust Washer Buy INA (Schaeffler) TWD4860 - Thrust Washer - Needle Roller Thrust, 3 in ID, 3-3/4 in OD, 0.126 in Width: Needle - Amazon.com ✓ FREE DELIVERY possible
INA Thrust Bearings and Washers - Grainger Industrial Supply104 products - Thrust bearings are a type of rotary bearing that allow rotating parts to move smoothly while supporting axial loads (those parallel to the shaft) in INA (Schaeffler) - TWA1018 - Motion IndustriesBuy INA (Schaeffler) Roller Thrust Bearing Washers TWA1018 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
@@@@@@@@ | ||||||||
A | B | G | J | D | C | N | d | |
df0766lluacs32 | 32 mm | 25 mm | - | 50.8 mm | - | 12.8 kN | M8 | - |
6300-RS-C3 | - | 12mm | - | - | - | - | - | 20mm |
6252M-C3 | - | 128mm | - | - | 360mm | - | - | 200mm |
6300-RS | - | 31mm | - | - | 130mm | - | - | 75mm |
6301-2RS-NR | - | - | - | - | 210mm | - | - | 140mm |
6244M | - | - | - | - | 61.913 mm | - | - | 30 mm |
6240-C3 | - | - | - | - | 190mm | - | - | 90mm |
6301-Z | - | - | - | - | - | - | - | - |
6302-2RZ-NR | - | - | M45x1.5 | - | - | 11 mm | - | - |
6300-Z-C3 | - | 22mm | - | - | 110mm | - | - | 60mm |
6301-RS | - | 13mm | - | - | - | - | - | - |
6301-Z-C3 | - | - | - | - | - | - | - | - |
6303-2RS-NR | - | - | - | - | 150 mm | - | - | - |
6303-RS | - | - | - | - | - | - | - | - |
6302-ZZ-NR | - | 12mm | - | - | 42mm | - | - | 20mm |
6301-RS-C3 | - | 46mm | - | - | 180mm | - | - | 120mm |
6303-Z | - | - | - | - | - | - | - | - |
6303-2RZ-NR | - | 24mm | - | - | 150mm | - | - | - |
6303-RS-C3 | - | - | - | - | - | - | - | 90 mm |
6304-2RS-NR | - | - | - | - | 4.5268 in | - | - | - |
6303-Z-NR-C3 | - | 36mm | - | - | 150mm | - | - | 85mm |
6303-Z-NR | - | 31mm | - | - | 120mm | - | - | 65mm |
6304-2RS-NR-C3 | - | - | - | - | - | - | - | 571.500 mm |
6304-2RZ-NR | - | - | - | - | - | - | - | 140mm |
6304-2RZ-NR-C3 | - | - | - | - | 420 mm | - | - | - |
6304-RS | - | 35mm | - | - | 150mm | - | - | 70mm |
6005-2ZNR | - | - | - | - | - | - | - | - |
6000-2RSH | - | - | - | - | - | - | - | - |
628/6-2Z | - | - | - | - | - | - | - | - |
619/1400 MB | - | 23 mm | - | - | - | - | - | 65 mm |
6305-RZ | - | - | - | - | 240.0000 mm | - | - | 110.000 mm |
6412 NR | - | - | - | - | - | - | - | - |
W 619/6 R-2RS1 | - | 24.00 mm | - | - | 145.0000 mm | - | - | 95.000 mm |
6224-2Z | - | - | - | - | - | - | - | 1.5000 in |
RLS 9-2RS1 | - | - | - | - | - | - | - | 65.0000 mm |
W 628/9 R-2RS1 | - | - | - | - | - | - | - | - |
W 627/4 R-2Z | - | 82.00 mm | - | - | 180.0000 mm | - | - | 85.000 mm |
635-2Z | - | - | - | - | - | - | - | - |
6092 MB | - | - | - | - | 1060 mm | - | - | 800 mm |
W 61808-2RS1 | - | 27.00 mm | - | - | 62.0000 mm | - | - | 30.000 mm |
D/W R4-2RS1 | - | - | - | - | 180 mm | - | - | - |
6080 M | - | - | - | - | - | - | - | - |
6016-2RS1 | - | 20.60 mm | - | - | 52.0000 mm | - | - | 25.000 mm |
D/W R1-5 R-2Z | - | - | - | - | - | - | - | 2.4375 in |
W 619/5-2Z | - | 104.00 mm | - | - | 210.0000 mm | - | - | 85.000 mm |
6318-RS1 | - | - | - | - | - | - | - | 3.4375 in |
6303-Z | - | 49.20 mm | - | - | 150.0000 mm | - | - | 85.000 mm |
6007-2Z | - | - | - | - | 460 mm | - | - | - |
W 628/5-2RS1 | - | - | - | - | - | - | - | - |
607-Z | - | - | - | - | 700 mm | - | - | 420 mm |
W 618/0.6 | - | - | - | - | - | - | - | - |
6005 N | - | - | - | - | - | - | - | - |
W 61705-2RZ | - | - | - | - | - | - | - | - |
W 6002-2Z | - | - | - | - | - | - | - | 0.7500 in |
W 638/4 R-2Z | - | 41.30 mm | - | - | 130.0000 mm | - | - | 75.000 mm |
W 635 R-2Z | - | 65 mm | - | - | - | - | - | 280 mm |
W 639/2-2Z | - | - | - | - | - | - | - | - |
306704 C | - | 58 mm | - | - | 250 mm | - | - | 100 mm |
W 607-2Z | - | - | - | - | - | - | - | 19.100 mm |
635-2RS1 | - | - | - | - | - | - | - | 1.6875 in |
6226-2RS1 | - | 64 mm | - | - | 190 mm | - | - | 90 mm |
618/670 MA | - | - | - | - | 980 mm | - | - | 530 mm |
6201 N | - | - | - | - | - | - | - | - |
62204-2RS1 | - | - | - | - | - | - | - | 160 mm |
D/W R3W.1562 R | - | 140 mm | - | - | - | - | - | - |
62308-2RS1 | - | 16 mm | - | - | 62 mm | - | - | 30 mm |
W 61907-2Z | - | 33.00 mm | - | - | 210.0000 mm | - | - | 140.000 mm |
D/W R2A | - | 12.00 mm | - | - | 37.0000 mm | - | - | 12.000 mm |
6224-RS1 | - | - | - | - | - | - | - | 1.3750 in |
316-Z | - | 51.00 mm | - | - | 310.0000 mm | - | - | 200.000 mm |
6321-Z | - | - | - | - | - | - | - | 1.1875 in |
618/670 TN | - | - | - | - | - | - | - | 3.9375 in |
6010-2RZ | - | 24.00 mm | - | - | 125.0000 mm | - | - | 70.000 mm |
W 606 R-2RS1 | - | - | - | - | - | - | - | - |
213 NR | - | - | - | - | - | - | - | - |
W 6301-2RS1 | - | - | - | - | - | - | - | - |
6206 N | - | 23.00 mm | - | - | 90.0000 mm | - | - | 50.000 mm |
61813-2RZ | - | 7.00 mm | - | - | 30.0000 mm | - | - | 17.000 mm |
315-2Z | - | - | - | - | 190 mm | - | - | 90 mm |
W 6206-2Z | - | - | - | - | - | - | - | - |
607-2Z | - | - | - | - | 230 mm | - | - | - |
INA Thrust Washers - Grainger Industrial SupplyCome to Grainger for thrust washers to help prevent movement along the axis of a shaft bearing an axial load. Use them as fatigue liners for soft housing faces or
INA (Schaeffler) - LS3047 - Motion IndustriesBuy INA (Schaeffler) Roller Thrust Bearing Washers LS3047 direct from Motion Thrust Washer - Needle Roller Thrust, 30 mm ID, 47 mm OD, 3 mm Width INA Needle bearing thrust washer series AS | ERIKS shop NLFind your Needle bearing thrust washer series AS at ERIKS. Choose from more than 500.000 products online and order right away